Active Track and Active View the Real Time Proof of Presence with Man Down/Lone Worker Solution
Our Active Track solution is easy to install and provides real-time patrol information without the need to download the Data Reader to a PC. All information is accessed via a secure login from any PC, or Smart Device.
In addition to its normal function of retrieving patrol data in real-time from the installed Checkpoints, the Active Track Handheld Data Reader can also be used as a cell phone. Using a 4G SIM the user can call a previously programmed number directly or send a signal via GPRS to the monitoring station with a request for reply. It is also possible to receive calls with Active Track Data Reader.
System Functionality and Benefits
Two-Way Voice Communication Device
The Data Reader can be used as a cell phone. Using a 4G SIM, the user can directly call a pre-programmed number or send a signal via GPRS to the monitoring station with a request for a reply. It is also possible to receive calls with Active Track Data Reader.
Personal Protection System
A Panic button enables the sending of an alarm signal. This data and voice transmission helps lone workers call for help in case of a possible emergency situation.
MAN-DOWN –Motion Sensor for Fall Detection
Fully automated notification to aid lone workers fight against life-threatening situations. One can configure the default position and angles – thanks to tilt detection Active Track. It sends an automatic alarm signal if the position is outside the defined range.
A-GPS (Assisted GPS)
Ideal for emergencies, Active Track offers external & internal tracking by delivering satellite data such as accurate time and satellite status to the GPS receiver. This data enables the GPS receiver to compute a position within seconds, even under poor signal conditions.
GeoFencing
Track and monitor the position of GPS with the GeoFending feature. The system receives an automatic alarm signal if the user crosses the boundary of the determined zone.
Tamper Detection Alert
- Excessive shock detection – notification about all mechanical attempts to destroy the device.
- Tamper switch – protection against opening the device by an unauthorized person.
Online, Real-Time Tracking and History
By using Active Track & Active View, users can track the locations of all their devices in real time. One can also view the history of where the devices have been.
Large Memory Capacity
Built-in memory for registering up to 2000 events in history. This lets patrol units collect information for long durations about alarm signals, voice/sms connections and the route registered by GPS.
Programming Buttons for Sending SMS Alarms
Buttons on the Active track device can be programmed to send SMS alarms upon fulfilling certain conditions. This ensures the smooth functioning of the system.
For more information on the system’s advanced features and how it operates, please see the attached datasheet. You can also view a short video presentation by clicking on this link:-
Reader type | Proximity RFID |
Frequency and standard | 125kHz, unique |
RFID read-out distance | 3-4cm (depends on transponder type) |
GSM module | U-Blox Leon G-100 (850/900/1800/1900 MHz) |
GPS module | |
Channels | 50 channel u-blox 6 engine |
A-GPS online/offline support | YES |
Position accuracy | < 2,5 m |
TTFF hot start acquisition time | < 1 s average |
TTFF cold start acquisition time | < 27 s average |
Electrical characteristics | |
Power supply | 5V/1A |
Power socket | Standardised Micro USB type B plug |
Battery | Li-Polymer, 2400 mAh |
Battery working time after charging | 24 hours |
Casing protection rating | IP67 |
Physical characteristics | |
Dimensions (HxWxT) | 121x60x30 mm |
Housing | The waterproof and shock-resistant housing |
Weight | 150g (GPS device) 30g (charger) |
Motion sensor | 3-axis motion sensor (accelerometer) |
Interfaces & general features | Internal speaker and microphone 4 buttons for easy operating Ambient operating temperature: -20°C to +60°C Based on durability-assumptions for Active Guard Data transmission via GPRS (TCP, IP), SMS to OSM.2007 Voice call Silent call Remote administration & firmware update |
Configuration | Local: PC through RS232 link (LX cable and AGP3 programmer required) Remote: via GPRS, SMS, CSD |
Alarm events buffer size | 1000 |
Quantity of system events stored in history | 2000 |
Please note that as the system utilises GSM Technology if no signal can be found or the signal drops out, even if using the Roaming SIM some real-time functionalities could be lost. All transactions will still be recorded on the device and as soon as a connection is restored any transaction undertaken will be updated in the central software.
We at Guard Patrol Products are committed to finding the most appropriate solutions to your staff and asset monitoring needs. Call us at 0800 817 4259 or click here to get in touch with our experts & know more.
Contact Us
Recent Post
- Raising the Bar of Security with Our Active Track Devices
- Get the Best Body Cameras at Affordable Range
- Elevate Your Workplace Safety with Cuebly- A Powerful Safety Management Platform
- Enhancing Duty of Care in Healthcare Settings with Care Management Systems
- Safeguard your Enterprise with Our Safety Systems